Follow along as we break down how to mix hair colors together.

How to Mix Hair Colors Together and Get Great Results!

Have you ever wondered how to mix multiple colors together to create your own unique hair color? The good news is you can mix colors in the comfort of your own home and get great results! We promise it’s easier than you think. And, by mixing your hair color, not only are you getting a unique look but also giving your hair more depth than if you used only one color.  

However, before you begin coloring, there are a few things you should keep in mind so you can achieve the best results. Don’t worry, we’ve got you! Keep reading as we share with you all of our top tips and reminders when mixing colors together! 

Related: How to Apply Permanent Hair Color at Home

Follow along as we break down how to mix hair colors together to achieve the perfect look unique to you

A few general reminders 

Before you begin coloring, be sure to follow these simple steps.  

Do a hair strand test  

Always perform a hair strand test before coloring. This is a great way to get a sneak peek of the color before coloring all of your hair and will also help you avoid undesirable results. Keep in mind you will need to mix the small amount of color for the strand test in the same ratio that you are using for the all over color. For a step by step walk through on how to do a hair strand test, check out our blog post here.

Mix and go!  

Be sure to apply your hair color immediately after you mix it! What’s the rush? Once you mix them together, the product(s) will only keep for about an hour until it’s no longer at its maximum coloring effectiveness.  

Tips for mixing shades 

To make sure you end up with the results you’re hoping for, we’re sharing our favorite guidelines for mixing shades below.  

Maintain a 1:1 ratio of colorant and developer  

You should always aim to maintain a 1:1 ratio of colorant and developer to ensure full color activation. This is especially important when you mix colors, as the developer frequently differs between kits! For example, if you mix one-third 6N and two-thirds 9R, you’ll need to add one-third of the 6N developer and two-thirds of the 9R developer.  

Accurately measure portions  

To measure and mix colors, we suggest that you use a plastic or glass container that measures in milliliters. Like we mentioned above, it’s important that you stick to the manufacturer’s recommended 1:1 ratio of colorant and developer. To get the most accurate measurements, use a digital scale. Or, if you don’t have a digital scale, you can use a household item like a shot glass (yes, we’re totally serious) that measures in milliliters. Don’t skip this tip – if you guess on the proportions, the results may not be what you want or expect!  

One time use only 

Each kit is intended for a single treatment. However, you can save unmixed portions only if they stay unmixed in their original bottles and you use them during your next coloring. Once you open the product and it is exposed to oxygen, it begins to degrade and is less effective at coloring your hair.  

Get the most out of your developer  

Did you know that the color developer can sometimes stick to the inside of the bottle? So, to ensure that you get the full contents, store the developer upside down before you use it (lid on, of course!). Another way to maximize the amount of color developer is to use a rubber spatula to scrape the bottle. 

Important: don’t use metal or ceramic to mix your color as these will cause the product to oxidize and change colors!  

How to mix hair colors: remember these color rules  

If you follow these color suggestions, we have no doubt that you’ll end up with beautiful results!  

Use N tones for gray coverage 

Natural (N) shades provide a balance of warm and cool to create a neutral tone. N shades are best for covering high percentage or stubborn gray or whites as opposed to colors like reds and golds. And, they work well as a base for combining with other colors. You can mix colors in any proportion as long you maintain a 1:1 ratio with the specified developer. 

Ash & gold shades  

Cool Ash tones can dampen the shine of warm tones, which can make the color appear muddy. Therefore, we don’t recommend this combination. This holds true for any warm shade – gold, copper, mahogany, red or chocolate mixed with ash tones. Always avoid mixing colors that are the opposite of each other. If you are looking to reduce the appearance of brassiness, you can try mixing an Ash tone with a corresponding N tone.

The final reveal  

Since you’ve learned how to mix hair colors and the secrets to achieving beautiful results, we have no doubt that you’ll create a look that’s uniquely you! Whether you’re looking to slightly change your hair color or really switch it up, you can be confident that you can mix hair colors and get great results!  

Now, the fun part (shopping) starts! Browse our selection of cleaner permanent hair colors and start planning your perfect look today!  

Shop our permanent hair color line:  

Shop all colors >

Share on facebook
Share on pinterest
Share on twitter
Share on linkedin
you may also like these
join the conversation

Our products are also available on Amazon!